Exploding a Multi-body part -2

Continued to my earlier post on exploding a multi body part, here is another example.  I have used a Weldment part for his example.

Example 2: Exploding a Weldment Part.

1. Click here to download the SW2011 part files used for this example.

2. Unzip and open up Weldment Part-2011 file.

3. Set the “3DSketch1″ to show. Right click or click on “3DSketch1″ and select show.

4. Also make sure sketches are set to show under View menu.

5. Go to Insert > Features and select Move/Copy Bodies

6. Select the two bodies as shown in the pic under bodies to move/copy.

7. Expand Translate (as we want to move out the body) and give 15mm as Delta Z value.

8. Click OK to close the close the command and apply the changes. The bodies have moved out by 15 mm in Z direction.

9. Restart Move/Copy Bodies command using step 5 or right click any where on the graphics area and select Recent Commands > Move/Copy Bodies. You’ll have to restart the command for further steps.

10. Select the side body as shown. Select the “3DSketch1″ line for direction and give -15 as the distance value.

11. Click OK to close the close the command and apply the changes. The body has moved out by 15 mm.

12. Select the two bodies as shown in the pic. Give -15mm as Delta X value.

13. Click OK to close the close the command and apply the changes. The bodies have moved out by 15 mm in X direction.

14. Select the side body as shown. Select the “3DSketch1″ line for direction and give -15 as the distance value.

15. Click OK to close the close the command and apply the changes. The body has moved out by 15 mm.

16. Select the two bodies as shown in the pic. Give -15mm as Delta Z value.

17. Click OK to close the close the command and apply the changes. The bodies have moved out by 15 mm in Z direction.

18. Select the side body as shown. Select the “3DSketch1″ line for direction and give 15 as the distance value.

19. Click OK to close the close the command and apply the changes. The body has moved out by 15 mm.

20. Select the two bodies as shown in the pic. Give 15mm as Delta X value.

21. Click OK to close the close the command and apply the changes. The bodies have moved out by 15 mm in X direction.

22. Select the side body as shown. Select the “3DSketch1″ line for direction and give 15 as the distance value.

23. Click OK to close the close the command and apply the changes. The body has moved out by 15 mm.

24. You may hide the “3DSketch1″ if required. Right click or click on “3DSketch1″ and select hide.

25. You may add two configurations one showing collapsed bodies where as other one showing exploded bodies.

26. Download the completed SW2011 part file here.

About these ads

2 thoughts on “Exploding a Multi-body part -2

  1. Brian Watts

    Just a thought, before exploding the multi-body parts, should creating the exploded configuration be at the start of this example? Otherwise a great demostration. Keep up the good work.

    Brian

    Reply
    1. Deepak Gupta Post author

      Brian, appreciate your thoughts.

      Yes that can be a good start. Actually my main focus was on exploding the multi body part but then in end I thought of talking a little on the creating the two configurations showing exploded and collapsed state.

      Reply

I'll be happy to know your views and opinions as this will help me to improve. You can share them as comments below.

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s